CEN/TC 459
Date: 2025-05-15
prEN 10365:2025
Secretariat: DIN
Hot rolled steel channels, I- and H-sections — Dimensions and masses
Warmgewalzter U-Profilstahl, I- und H-Träger — Maße und Masse
Profilés en U, poutrelles I et H en aciers laminés à chaud — Dimensions et masses
CCMC will prepare and attach the official title page.
Contents Page
6 Tolerances on dimensions, shape and mass 7
Annex A (informative) Formulae for the calculation of sectional properties 33
This document (prEN 10365:2025) has been prepared by Technical Committee CEN/TC 459/SC 3 “Structural steels other than reinforcements”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 10365:2017.
In comparison to the previous edition, following technical modifications have been made:
— addition of divers new dimensions;
— addition of Annex A with formulae for static values;
— editorial update.
1.0 Scope
This document specifies the nominal dimensions and masses of the hot rolled steel channels, I and H sections.
The following shapes are covered by this document:
Sections:
— parallel flange I sections IPE;
— parallel wide flange beams HE;
— parallel extra wide flange beams HL and HLZ;
— parallel wide flange columns HD;
— parallel wide flange bearing piles HP and UBP;
— parallel flange universal beams UB;
— parallel flange universal columns UC;
— taper flange I sections IPN and J.
Channels:
— parallel flange channels UPE and PFC;
— taper flange channels UPN, U and CH.
These requirements do not apply to hot rolled steel channels, I- and H- sections from stainless steel.
2.0 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 10024, Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10025‑2, Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025‑3, Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025‑4, Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025‑5, Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10034, Structural steel I and H sections - Tolerances on shape and dimensions
EN 10079, Definition of steel products
EN 10279, Hot rolled steel channels - Tolerances on shape, dimensions and mass
3.0 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 10079 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4.0 Designation
A section shall be designated according to Tables 1 to 15.
This form of designation shall be used in any enquiry and order.
5.0 Dimensions and masses
Hot rolled steel channels, I and H sections complying with this document shall be manufactured with the specified dimensions given in the Table 1 to 15 and according to Figures 1 to 4 below.
Radii of fillets and toes of shape profiles vary with individual manufacturers and therefore are not specified. Radii given by the manufacturer or fixed otherwise, are only for the calculation of the nominal sectional properties and cannot be used for any other purpose.
The masses per unit length specified in Tables 1 to 15 were calculated on the basis of a density of 7850 kg/m3.
Figure 1 — IPE, HE, HL, HD, HP, UBP, UB and UC parallel flange sections
Figure 2 — Taper flange I sections IPN, J and extra wide flange beams HLZ
Figure 3 — Parallel flange channels UPE and PFC
Key
for UPN-channels: |
h ≤ 300 mm taper flange angle α = 8 % and b1 = b/2 |
h> 300 mm taper flange angle α = 5 % and b1 = (b-tw)/2 |
for CH- and U-channels: b1 = b/2 |
Figure 4 — Taper flange channels UPN, U and CH
6.0 Tolerances on dimensions, shape and mass
Tolerances on dimensions, shape and mass shall be as given in EN 10034 for I (parallel flanges) and H sections.
Tolerances on dimensions, shape and mass shall be as given in EN 10024 for taper flange I sections.
Tolerances on dimensions, shape and mass shall be as given in EN 10279 for channels.
Tolerances for shapes not included in the mentioned standards shall be as agreed upon between the manufacturer and the purchaser.
7.0 Material
Sections and channels shall preferably be made from steel of a grade as specified in, EN 10025‑2, EN 10025‑3, EN 10025‑4 and EN 10025‑5. Other steel grades as specified in EN 10225‑2, EN 10028‑2 and EN 10273 may also be used for specific applications.
The desired steel grade shall be specified at the time of ordering.
Table 1 — Parallel flange I sections IPE
Designation |
| Dimensions |
| |||
|---|---|---|---|---|---|---|
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
IPE AA 80 | 4,9 | 78,0 | 46,0 | 3,2 | 4,2 | 6,3 |
IPE A 80 | 5,0 | 78,0 | 46,0 | 3,3 | 4,2 | 6,4 |
IPE 80 | 6,0 | 80,0 | 46,0 | 3,8 | 5,2 | 7,6 |
IPE AA 100 | 6,7 | 97,6 | 55,0 | 3,6 | 4,5 | 8,6 |
IPE A 100 | 6,9 | 98,0 | 55,0 | 3,6 | 4,7 | 8,8 |
IPE 100 | 8,1 | 100,0 | 55,0 | 4,1 | 5,7 | 10,3 |
IPE AA 120 | 8,4 | 117,0 | 64,0 | 3,8 | 4,8 | 10,7 |
IPE A 120 | 8,7 | 117,6 | 64,0 | 3,8 | 5,1 | 11,0 |
IPE 120 | 10,4 | 120,0 | 64,0 | 4,4 | 6,3 | 13,2 |
IPE AA 140 | 10,1 | 136,6 | 73,0 | 3,8 | 5,2 | 12,8 |
IPE A 140 | 10,5 | 137,4 | 73,0 | 3,8 | 5,6 | 13,4 |
IPE 140 | 12,9 | 140,0 | 73,0 | 4,7 | 6,9 | 16,4 |
IPE AA 160 | 12,3 | 156,4 | 82,0 | 4,0 | 5,6 | 15,7 |
IPE A 160 | 12,7 | 157,0 | 82,0 | 4,0 | 5,9 | 16,2 |
IPE 160 | 15,8 | 160,0 | 82,0 | 5,0 | 7,4 | 20,1 |
IPE AA 180 | 14,9 | 176,4 | 91,0 | 4,3 | 6,2 | 19,0 |
IPE A 180 | 15,4 | 177,0 | 91,0 | 4,3 | 6,5 | 19,6 |
IPE 180 | 18,8 | 180,0 | 91,0 | 5,3 | 8,0 | 23,9 |
IPE O 180 | 21,3 | 182,0 | 92,0 | 6,0 | 9,0 | 27,1 |
IPE AA 200 | 18,0 | 196,4 | 100,0 | 4,5 | 6,7 | 22,9 |
IPE A 200 | 18,4 | 197,0 | 100,0 | 4,5 | 7,0 | 23,5 |
IPE 200 | 22,4 | 200,0 | 100,0 | 5,6 | 8,5 | 28,5 |
IPE O 200 | 25,1 | 202,0 | 102,0 | 6,2 | 9,5 | 32,0 |
IPE AA 220 | 21,2 | 216,4 | 110,0 | 4,7 | 7,4 | 27,0 |
IPE A 220 | 22,2 | 217,0 | 110,0 | 5,0 | 7,7 | 28,3 |
IPE 220 | 26,2 | 220,0 | 110,0 | 5,9 | 9,2 | 33,4 |
IPE O 220 | 29,4 | 222,0 | 112,0 | 6,6 | 10,2 | 37,4 |
IPE AA 240 | 24,9 | 236,4 | 120,0 | 4,8 | 8,0 | 31,7 |
IPE A 240 | 26,2 | 237,0 | 120,0 | 5,2 | 8,3 | 33,3 |
IPE 240 | 30,7 | 240,0 | 120,0 | 6,2 | 9,8 | 39,1 |
IPE O 240 | 34,3 | 242,0 | 122,0 | 7,0 | 10,8 | 43,7 |
IPE A 270 | 30,7 | 267,0 | 135,0 | 5,5 | 8,7 | 39,2 |
IPE 270 | 36,1 | 270,0 | 135,0 | 6,6 | 10,2 | 45,9 |
IPE O 270 | 42,3 | 274,0 | 136,0 | 7,5 | 12,2 | 53,8 |
IPE A 300 | 36,5 | 297,0 | 150,0 | 6,1 | 9,2 | 46,5 |
IPE 300 | 42,2 | 300,0 | 150,0 | 7,1 | 10,7 | 53,8 |
IPE O 300 | 49,3 | 304,0 | 152,0 | 8,0 | 12,7 | 62,8 |
IPE A 330 | 43,0 | 327,0 | 160,0 | 6,5 | 10,0 | 54,7 |
IPE 330 | 49,1 | 330,0 | 160,0 | 7,5 | 11,5 | 62,6 |
IPE O 330 | 57,0 | 334,0 | 162,0 | 8,5 | 13,5 | 72,6 |
IPE AA 360 | 47,0 | 356,4 | 170,0 | 6,0 | 10,9 | 59,9 |
IPE A 360 | 50,2 | 357,6 | 170,0 | 6,6 | 11,5 | 64,0 |
IPE 360 | 57,1 | 360,0 | 170,0 | 8,0 | 12,7 | 72,7 |
IPE O 360 | 66,0 | 364,0 | 172,0 | 9,2 | 14,7 | 84,1 |
IPE AA 400 | 53,4 | 395,6 | 180,0 | 6,3 | 11,3 | 68,0 |
IPE A 400 | 57,4 | 397,0 | 180,0 | 7,0 | 12,0 | 73,1 |
IPE 400 | 66,3 | 400,0 | 180,0 | 8,6 | 13,5 | 84,5 |
IPE O 400 | 75,7 | 404,0 | 182,0 | 9,7 | 15,5 | 96,4 |
IPE V 400 | 84,0 | 408,0 | 182,0 | 10,6 | 17,5 | 107,0 |
IPE AA 450 | 62,1 | 445,4 | 190,0 | 6,8 | 12,3 | 79,1 |
IPE A 450 | 67,2 | 447,0 | 190,0 | 7,6 | 13,1 | 85,6 |
IPE 450 | 77,6 | 450,0 | 190,0 | 9,4 | 14,6 | 98,8 |
IPE O 450 | 92,4 | 456,0 | 192,0 | 11,0 | 17,6 | 117,7 |
IPE V 450 | 107 | 460,0 | 194,0 | 12,4 | 19,6 | 132,0 |
IPE AA 500 | 73,2 | 495,2 | 200,0 | 7,5 | 13,6 | 93,3 |
IPE A 500 | 79,4 | 497,0 | 200,0 | 8,4 | 14,5 | 101,1 |
IPE 500 | 90,7 | 500,0 | 200,0 | 10,2 | 16,0 | 115,5 |
IPE O 500 | 107 | 506,0 | 202,0 | 12,0 | 19,0 | 136,7 |
IPE V 500 | 129 | 514,0 | 204,0 | 14,2 | 23,0 | 164,1 |
IPE AA 550 | 79,5 | 541,0 | 210,0 | 8,5 | 12,5 | 101,3 |
IPE A 550 | 92,1 | 547,0 | 210,0 | 9,0 | 15,7 | 117,3 |
IPE 550 | 106 | 550,0 | 210,0 | 11,1 | 17,2 | 134,4 |
IPE O 550 | 123 | 556,0 | 212,0 | 12,7 | 20,2 | 156,1 |
IPE V 550 | 159 | 566,0 | 216,0 | 17,1 | 25,2 | 202,0 |
IPE A 600 | 108 | 597,0 | 220,0 | 9,8 | 17,5 | 137,0 |
IPE 600 | 122 | 600,0 | 220,0 | 12,0 | 19,0 | 156,0 |
IPE O 600 | 154 | 610,0 | 224,0 | 15,0 | 24,0 | 196,8 |
IPE V 600 | 184 | 618,0 | 228,0 | 18,0 | 28,0 | 233,8 |
IPE 750 × 134 | 134 | 750,0 | 264,0 | 12,0 | 15,5 | 170,6 |
IPE 750 × 147 | 147 | 753,0 | 265,0 | 13,2 | 17,0 | 187,5 |
IPE 750 × 173 | 173 | 762,0 | 267,0 | 14,4 | 21,6 | 221,3 |
IPE 750 × 196 | 196 | 770,0 | 268,0 | 15,6 | 25,4 | 250,8 |
IPE 750 × 220 | 220 | 779,0 | 266,0 | 16,5 | 30,0 | 280,7 |
Table 2 — Wide flange beams HE
Designation |
| Dimensions |
| |||
|---|---|---|---|---|---|---|
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
HE 100 AA | 12,2 | 91,0 | 100,0 | 4,2 | 5,5 | 15,6 |
HE 100 A | 16,7 | 96,0 | 100,0 | 5,0 | 8,0 | 21,2 |
HE 100 B | 20,4 | 100,0 | 100,0 | 6,0 | 10,0 | 26,0 |
HE 100 C | 30,9 | 110,0 | 103,0 | 9,0 | 15,0 | 39,3 |
HE 100 M | 41,8 | 120,0 | 106,0 | 12,0 | 20,0 | 53,2 |
HE 120 AA | 14,6 | 109,0 | 120,0 | 4,2 | 5,5 | 18,6 |
HE 120 A | 19,9 | 114,0 | 120,0 | 5,0 | 8,0 | 25,3 |
HE 120 B | 26,7 | 120,0 | 120,0 | 6,5 | 11,0 | 34,0 |
HE 120 C | 39,2 | 130,0 | 123,0 | 9,5 | 16,0 | 49,9 |
HE 120 M | 52,1 | 140,0 | 126,0 | 12,5 | 21,0 | 66,4 |
HE 140 AA | 18,1 | 128,0 | 140,0 | 4,3 | 6,0 | 23,0 |
HE 140 A | 24,7 | 133,0 | 140,0 | 5,5 | 8,5 | 31,4 |
HE 140 B | 33,7 | 140,0 | 140,0 | 7,0 | 12,0 | 43,0 |
HE 140 C | 48,2 | 150,0 | 143,0 | 10,0 | 17,0 | 61,5 |
HE 140 M | 63,2 | 160,0 | 146,0 | 13,0 | 22,0 | 80,6 |
HE 160 AA | 23,8 | 148,0 | 160,0 | 4,5 | 7,0 | 30,4 |
HE 160 A | 30,4 | 152,0 | 160,0 | 6,0 | 9,0 | 38,8 |
HE 160 B | 42,6 | 160,0 | 160,0 | 8,0 | 13,0 | 54,3 |
HE 160 C | 59,2 | 170,0 | 163,0 | 11,0 | 18,0 | 75,4 |
HE 160 M | 76,2 | 180,0 | 166,0 | 14,0 | 23,0 | 97,1 |
HE 180 AA | 28,7 | 167,0 | 180,0 | 5,0 | 7,5 | 36,5 |
HE 180 A | 35,5 | 171,0 | 180,0 | 6,0 | 9,5 | 45,3 |
HE 180 B | 51,2 | 180,0 | 180,0 | 8,5 | 14,0 | 65,3 |
HE 180 C | 69,8 | 190,0 | 183,0 | 11,5 | 19,0 | 89,0 |
HE 180 M | 88,9 | 200,0 | 186,0 | 14,5 | 24,0 | 113,3 |
HE 200 AA | 34,6 | 186,0 | 200,0 | 5,5 | 8,0 | 44,1 |
HE 200 A | 42,3 | 190,0 | 200,0 | 6,5 | 10,0 | 53,8 |
HE 200 B | 61,3 | 200,0 | 200,0 | 9,0 | 15,0 | 78,1 |
HE 200 C | 81,9 | 210,0 | 203,0 | 12,0 | 20,0 | 104,4 |
HE 200 M | 103 | 220,0 | 206,0 | 15,0 | 25,0 | 131,3 |
HE 220 AA | 40,4 | 205,0 | 220,0 | 6,0 | 8,5 | 51,5 |
HE 220 A | 50,5 | 210,0 | 220,0 | 7,0 | 11,0 | 64,3 |
HE 220 B | 71,5 | 220,0 | 220,0 | 9,5 | 16,0 | 91,0 |
HE 220 C | 94,1 | 230,0 | 223,0 | 12,5 | 21,0 | 119,9 |
HE 220 M | 117 | 240,0 | 226,0 | 15,5 | 26,0 | 149,4 |
HE 240 AA | 47,4 | 224,0 | 240,0 | 6,5 | 9,0 | 60,4 |
HE 240 A | 60,3 | 230,0 | 240,0 | 7,5 | 12,0 | 76,8 |
HE 240 B | 83,2 | 240,0 | 240,0 | 10,0 | 17,0 | 106,0 |
HE 240 C | 119 | 255,0 | 244,0 | 14,0 | 24,5 | 152,2 |
HE 240 M | 157 | 270,0 | 248,0 | 18,0 | 32,0 | 199,6 |
HE 260 AA | 54,1 | 244,0 | 260,0 | 6,5 | 9,5 | 69,0 |
HE 260 A | 68,2 | 250,0 | 260,0 | 7,5 | 12,5 | 86,8 |
HE 260 B | 93,0 | 260,0 | 260,0 | 10,0 | 17,5 | 118,4 |
HE 260 C | 132 | 275,0 | 264,0 | 14,0 | 25,0 | 168,4 |
HE 260 M | 172 | 290,0 | 268,0 | 18,0 | 32,5 | 219,6 |
HE 280 AA | 61,2 | 264,0 | 280,0 | 7,0 | 10,0 | 78,0 |
HE 280 A | 76,4 | 270,0 | 280,0 | 8,0 | 13,0 | 97,3 |
HE 280 B | 103 | 280,0 | 280,0 | 10,5 | 18,0 | 131,4 |
HE 280 C | 145 | 295,0 | 284,0 | 14,5 | 25,5 | 185,2 |
HE 280 M | 189 | 310,0 | 288,0 | 18,5 | 33,0 | 240,2 |
HE 300 AA | 69,8 | 283,0 | 300,0 | 7,5 | 10,5 | 88,9 |
HE 300 A | 88,3 | 290,0 | 300,0 | 8,5 | 14,0 | 112,5 |
HE 300 B | 117 | 300,0 | 300,0 | 11,0 | 19,0 | 149,1 |
HE 300 C | 177 | 320,0 | 305,0 | 16,0 | 29,0 | 225,1 |
HE 300 M | 238 | 340,0 | 310,0 | 21,0 | 39,0 | 303,1 |
HE 320 AA | 74,2 | 301,0 | 300,0 | 8,0 | 11,0 | 94,6 |
HE 320 A | 97,6 | 310,0 | 300,0 | 9,0 | 15,5 | 124,4 |
HE 320 B | 127 | 320,0 | 300,0 | 11,5 | 20,5 | 161,3 |
HE 320 C | 186 | 340,0 | 305,0 | 16,0 | 30,5 | 236,9 |
HE 320 M | 245 | 359,0 | 309,0 | 21,0 | 40,0 | 312,0 |
HE 340 AA | 78,9 | 320,0 | 300,0 | 8,5 | 11,5 | 100,5 |
HE 340 A | 105 | 330,0 | 300,0 | 9,5 | 16,5 | 133,5 |
HE 340 B | 134 | 340,0 | 300,0 | 12,0 | 21,5 | 170,9 |
HE 340 M | 248 | 377,0 | 309,0 | 21,0 | 40,0 | 315,8 |
HE 360 AA | 83,7 | 339,0 | 300,0 | 9,0 | 12,0 | 106,6 |
HE 360 A | 112 | 350,0 | 300,0 | 10,0 | 17,5 | 142,8 |
HE 360 B | 142 | 360,0 | 300,0 | 12,5 | 22,5 | 180,6 |
HE 360 M | 250 | 395,0 | 308,0 | 21,0 | 40,0 | 318,8 |
HE 400 AA | 92,4 | 378,0 | 300,0 | 9,5 | 13,0 | 117,7 |
HE 400 A | 125 | 390,0 | 300,0 | 11,0 | 19,0 | 159,0 |
HE 400 B | 155 | 400,0 | 300,0 | 13,5 | 24,0 | 197,8 |
HE 400 M | 256 | 432,0 | 307,0 | 21,0 | 40,0 | 325,8 |
HE 450 AA | 99,7 | 425,0 | 300,0 | 10,0 | 13,5 | 127,1 |
HE 450 A | 140 | 440,0 | 300,0 | 11,5 | 21,0 | 178,0 |
HE 450 B | 171 | 450,0 | 300,0 | 14,0 | 26,0 | 218,0 |
HE 450 M | 263 | 478,0 | 307,0 | 21,0 | 40,0 | 335,4 |
HE 500 AA | 107 | 472,0 | 300,0 | 10,5 | 14,0 | 136,9 |
HE 500 A | 155 | 490,0 | 300,0 | 12,0 | 23,0 | 197,5 |
HE 500 B | 187 | 500,0 | 300,0 | 14,5 | 28,0 | 238,6 |
HE 500 M | 270 | 524,0 | 306,0 | 21,0 | 40,0 | 344,3 |
HE 550 AA | 120 | 522,0 | 300,0 | 11,5 | 15,0 | 152,8 |
HE 550 A | 166 | 540,0 | 300,0 | 12,5 | 24,0 | 211,8 |
HE 550 B | 199 | 550,0 | 300,0 | 15,0 | 29,0 | 254,1 |
HE 550 M | 278 | 572,0 | 306,0 | 21,0 | 40,0 | 354,4 |
HE 600 AA | 129 | 571,0 | 300,0 | 12,0 | 15,5 | 164,1 |
HE 600 A | 178 | 590,0 | 300,0 | 13,0 | 25,0 | 226,5 |
HE 600 B | 212 | 600,0 | 300,0 | 15,5 | 30,0 | 270,0 |
HE 600 M | 285 | 620,0 | 305,0 | 21,0 | 40,0 | 363,7 |
HE 600 × 337 | 337 | 632,0 | 310,0 | 25,5 | 46,0 | 429,2 |
HE 600 × 399 | 399 | 648,0 | 315,0 | 30,0 | 54,0 | 508,5 |
HE 650 AA | 138 | 620,0 | 300,0 | 12,5 | 16,0 | 175,8 |
HE 650 A | 190 | 640,0 | 300,0 | 13,5 | 26,0 | 241,6 |
HE 650 B | 225 | 650,0 | 300,0 | 16,0 | 31,0 | 286,3 |
HE 650 M | 293 | 668,0 | 305,0 | 21,0 | 40,0 | 373,7 |
HE 650 × 343 | 343 | 680,0 | 309,0 | 25,0 | 46,0 | 437,5 |
HE 650 × 407 | 407 | 696,0 | 314,0 | 29,5 | 54,0 | 518,8 |
HE 700 AA | 150 | 670,0 | 300,0 | 13,0 | 17,0 | 190,9 |
HE 700 A | 204 | 690,0 | 300,0 | 14,5 | 27,0 | 260,5 |
HE 700 B | 241 | 700,0 | 300,0 | 17,0 | 32,0 | 306,4 |
HE 700 M | 301 | 716,0 | 304,0 | 21,0 | 40,0 | 383,0 |
HE 700 × 352 | 352 | 728,0 | 308,0 | 25,0 | 46,0 | 448,6 |
HE 700 × 418 | 418 | 744,0 | 313,0 | 29,5 | 54,0 | 531,9 |
HE 800 AA | 172 | 770,0 | 300,0 | 14,0 | 18,0 | 218,5 |
HE 800 A | 224 | 790,0 | 300,0 | 15,0 | 28,0 | 285,8 |
HE 800 B | 262 | 800,0 | 300,0 | 17,5 | 33,0 | 334,2 |
HE 800 M | 317 | 814,0 | 303,0 | 21,0 | 40,0 | 404,3 |
HE 800 × 373 | 373 | 826,0 | 308,0 | 25,0 | 46,0 | 474,6 |
HE 800 × 444 | 444 | 842,0 | 313,0 | 30,0 | 54,0 | 566,0 |
HE 900 AA | 198 | 870,0 | 300,0 | 15,0 | 20,0 | 252,2 |
HE 900 A | 252 | 890,0 | 300,0 | 16,0 | 30,0 | 320,5 |
HE 900 B | 291 | 900,0 | 300,0 | 18,5 | 35,0 | 371,3 |
HE 900 M | 333 | 910,0 | 302,0 | 21,0 | 40,0 | 423,6 |
HE 900 × 391 | 391 | 922,0 | 307,0 | 25,0 | 46,0 | 497,7 |
HE 900 × 466 | 466 | 938,0 | 312,0 | 30,0 | 54,0 | 593,7 |
HE 1000 AA | 222 | 970,0 | 300,0 | 16,0 | 21,0 | 282,2 |
HE 1000 × 249 | 249 | 980,0 | 300,0 | 16,5 | 26,0 | 316,8 |
HE 1000 A | 272 | 990,0 | 300,0 | 16,5 | 31,0 | 346,8 |
HE 1000 B | 314 | 1000,0 | 300,0 | 19,0 | 36,0 | 400,0 |
HE 1000 M | 349 | 1008,0 | 302,0 | 21,0 | 40,0 | 444,2 |
HE 1000 × 393 | 393 | 1016,0 | 303,0 | 24,4 | 43,9 | 500,2 |
HE 1000 × 415 | 415 | 1020,0 | 304,0 | 26,0 | 46,0 | 528,7 |
HE 1000 × 438 | 438 | 1026,0 | 305,0 | 26,9 | 49,0 | 556,0 |
HE 1000 × 494 | 494 | 1036,0 | 309,0 | 31,0 | 54,0 | 629,1 |
HE 1000 × 584 | 584 | 1056,0 | 314,0 | 36,0 | 64,0 | 743,7 |
Table 3 — Extra wide flange beams HL and HLZ
Designation |
| Dimensions |
| |||
|---|---|---|---|---|---|---|
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
HL 920 × 344 | 344 | 927,0 | 418,0 | 19,3 | 32,0 | 437,2 |
HL 920 × 368 | 368 | 931,0 | 419,0 | 20,3 | 34,3 | 465,6 |
HL 920 × 390 | 390 | 936,0 | 420,0 | 21,3 | 36,6 | 494,3 |
HL 920 × 420 | 420 | 943,0 | 422,0 | 22,5 | 39,9 | 534,1 |
HL 920 × 449 | 449 | 948,0 | 423,0 | 24,0 | 42,7 | 571,4 |
HL 920 × 491 | 491 | 957,0 | 422,0 | 25,9 | 47,0 | 623,3 |
HL 920 × 537 | 537 | 965,0 | 425,0 | 28,4 | 51,1 | 682,5 |
HL 920 × 588 | 588 | 975,0 | 427,0 | 31,0 | 55,9 | 748,1 |
HL 920 × 656 | 656 | 987,0 | 431,0 | 34,5 | 62,0 | 835,3 |
HL 920 × 725 | 725 | 999,0 | 434,0 | 38,1 | 68,1 | 922,9 |
HL 920 × 787 | 787 | 1011,0 | 437,0 | 40,9 | 73,9 | 1002,0 |
HL 920 × 970 | 970 | 1043,0 | 446,0 | 50,0 | 89,9 | 1236,6 |
HL 920 × 1077 | 1077 | 1061,0 | 451,0 | 55,0 | 99,1 | 1371,5 |
HL 920 × 1194 | 1194 | 1081,0 | 457,0 | 60,5 | 109,0 | 1521,5 |
HL 920 × 1269 | 1269 | 1093,0 | 461,0 | 64,0 | 115,1 | 1616,5 |
HL 920 × 1377 | 1377 | 1093,0 | 473,0 | 76,7 | 115,1 | 1753,7 |
HL 1000 AA | 296 | 982,0 | 400,0 | 16,5 | 27,1 | 377,6 |
HL 1000 A | 321 | 990,0 | 400,0 | 16,5 | 31,0 | 408,8 |
HL 1000 B | 371 | 1000,0 | 400,0 | 19,0 | 36,1 | 472,8 |
HL 1000 M | 412 | 1008,0 | 402,0 | 21,1 | 40,0 | 525,1 |
HL 1000 × 443 | 443 | 1012,0 | 402,0 | 23,6 | 41,9 | 563,7 |
HL 1000 × 483 | 483 | 1020,0 | 404,0 | 25,4 | 46,0 | 615,1 |
HL 1000 × 539 | 539 | 1030,0 | 407,0 | 28,4 | 51,1 | 687,2 |
HL 1000 × 554 | 554 | 1032,0 | 408,0 | 29,5 | 52,0 | 705,8 |
HL 1000 × 591 | 591 | 1040,0 | 409,0 | 31,0 | 55,9 | 752,7 |
HL 1000 × 642 | 642 | 1048,0 | 412,0 | 34,0 | 60,0 | 817,6 |
HL 1000 × 748 | 748 | 1068,0 | 417,0 | 39,0 | 70,0 | 953,4 |
HL 1000 × 883 | 883 | 1092,0 | 424,0 | 45,5 | 82,0 | 1125,3 |
HL 1000 × 976 | 976 | 1108,0 | 428,0 | 50,0 | 89,9 | 1241,4 |
HL 1100 A | 343 | 1090,0 | 400,0 | 18,0 | 31,0 | 436,5 |
HL 1100 B | 390 | 1100,0 | 400,0 | 20,0 | 36,0 | 497,0 |
HL 1100 M | 433 | 1108,0 | 402,0 | 22,0 | 40,0 | 551,2 |
HL 1100 R | 499 | 1118,0 | 405,0 | 26,0 | 45,0 | 635,2 |
HL 1100 × 548 | 548 | 1128,0 | 407,0 | 28,0 | 50,0 | 698,3 |
HL 1100 × 607 | 607 | 1138,0 | 410,0 | 31,0 | 55,0 | 773,1 |
HLZ 1100 A | 393 | 1075,4 | 458,0 | 20,0 | 31,0 | 500,8 |
HLZ 1100 B | 408 | 1079,4 | 458,0 | 20,0 | 33,0 | 519,1 |
HLZ 1100 C | 430 | 1083,4 | 459,0 | 21,0 | 35,0 | 548,3 |
HLZ 1100 D | 453 | 1087,4 | 460,0 | 22,0 | 37,0 | 577,5 |
Table 4 — Wide flange columns HD
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
HD 260 × 54,1 | 54,1 | 244,0 | 260,0 | 6,5 | 9,5 | 69,0 |
HD 260 × 68,2 | 68,2 | 250,0 | 260,0 | 7,5 | 12,5 | 86,8 |
HD 260 × 93,0 | 93,0 | 260,0 | 260,0 | 10,0 | 17,5 | 118,4 |
HD 260 × 114 | 114 | 268,0 | 262,0 | 12,5 | 21,5 | 145,7 |
HD 260 × 142 | 142 | 278,0 | 265,0 | 15,5 | 26,5 | 180,3 |
HD 260 × 172 | 172 | 290,0 | 268,0 | 18,0 | 32,5 | 219,6 |
HD 260 × 225 | 225 | 309,0 | 271,0 | 24,0 | 42,0 | 286,6 |
HD 260 × 299 | 299 | 335,0 | 278,0 | 31,0 | 55,0 | 380,5 |
HD 320 × 74,2 | 74,2 | 301,0 | 300,0 | 8,0 | 11,0 | 94,6 |
HD 320 × 97,6 | 97,6 | 310,0 | 300,0 | 9,0 | 15,5 | 124,4 |
HD 320 × 127 | 127 | 320,0 | 300,0 | 11,5 | 20,5 | 161,3 |
HD 320 × 158 | 158 | 330,0 | 303,0 | 14,5 | 25,5 | 201,2 |
HD 320 × 198 | 198 | 343,0 | 306,0 | 18,0 | 32,0 | 252,3 |
HD 320 × 245 | 245 | 359,0 | 309,0 | 21,0 | 40,0 | 312,0 |
HD 320 × 300 | 300 | 375,0 | 313,0 | 27,0 | 48,0 | 382,1 |
HD 360 × 134 | 134 | 356,0 | 369,0 | 11,2 | 18,0 | 170,6 |
HD 360 × 147 | 147 | 360,0 | 370,0 | 12,3 | 19,8 | 187,9 |
HD 360 × 162 | 162 | 364,0 | 371,0 | 13,3 | 21,8 | 206,3 |
HD 360 × 179 | 179 | 368,0 | 373,0 | 15,0 | 23,9 | 228,3 |
HD 360 × 196 | 196 | 372,0 | 374,0 | 16,4 | 26,2 | 250,3 |
HD 400 × 187 | 187 | 368,0 | 391,0 | 15,0 | 24,0 | 237,6 |
HD 400 × 216 | 216 | 375,0 | 394,0 | 17,3 | 27,7 | 275,5 |
HD 400 × 237 | 237 | 380,0 | 395,0 | 18,9 | 30,2 | 300,9 |
HD 400 × 262 | 262 | 387,0 | 398,0 | 21,1 | 33,3 | 334,6 |
HD 400 × 287 | 287 | 393,0 | 399,0 | 22,6 | 36,6 | 366,3 |
HD 400 × 314 | 314 | 399,0 | 401,0 | 24,9 | 39,6 | 399,2 |
HD 400 × 347 | 347 | 407,0 | 404,0 | 27,2 | 43,7 | 442,0 |
HD 400 × 382 | 382 | 416,0 | 406,0 | 29,8 | 48,0 | 487,1 |
HD 400 × 421 | 421 | 425,0 | 409,0 | 32,8 | 52,6 | 537,1 |
HD 400 × 463 | 463 | 435,0 | 412,0 | 35,8 | 57,4 | 589,5 |
HD 400 × 509 | 509 | 446,0 | 416,0 | 39,1 | 62,7 | 649,0 |
HD 400 × 551 | 551 | 455,0 | 418,0 | 42,0 | 67,6 | 701,4 |
HD 400 × 592 | 592 | 465,0 | 421,0 | 45,0 | 72,3 | 754,9 |
HD 400 × 634 | 634 | 474,0 | 424,0 | 47,6 | 77,1 | 808,0 |
HD 400 × 677 | 677 | 483,0 | 428,0 | 51,2 | 81,5 | 863,4 |
HD 400 × 744 | 744 | 498,0 | 432,0 | 55,6 | 88,9 | 948,1 |
HD 400 × 818 | 818 | 514,0 | 437,0 | 60,5 | 97,0 | 1043,3 |
HD 400 × 900 | 900 | 531,0 | 442,0 | 65,9 | 106,0 | 1149,2 |
HD 400 × 990 | 990 | 550,0 | 448,0 | 71,9 | 115,0 | 1262,4 |
HD 400 × 1086 | 1086 | 569,0 | 454,0 | 78,0 | 125,0 | 1385,8 |
HD 400 × 1202 | 1202 | 580,0 | 471,0 | 95,0 | 130,0 | 1530,5 |
HD 400 × 1299 | 1299 | 600,0 | 476,0 | 100,0 | 140,0 | 1654,7 |
HD 400 x 1384 | 1384 | 617,0 | 481,0 | 104,5 | 148,4 | 1760,0 |
HD 400 x 1488 | 1488 | 640,0 | 484,0 | 108,0 | 159,8 | 1890,0 |
Table 5 — Wide flange bearing piles HP
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
HP 200 × 43 | 42,5 | 200,0 | 205,0 | 9,0 | 9,0 | 54,1 |
HP 200 × 53 | 53,5 | 204,0 | 207,0 | 11,3 | 11,3 | 68,4 |
HP 220 × 57 | 57,2 | 210,0 | 224,5 | 11,0 | 11,0 | 72,9 |
HP 260 × 75 | 75,0 | 249,0 | 265,0 | 12,0 | 12,0 | 95,5 |
HP 260 × 87 | 87,3 | 253,0 | 267,0 | 14,0 | 14,0 | 111,0 |
HP 305 × 79 | 78,9 | 299,3 | 306,4 | 11,0 | 11,1 | 100,5 |
HP 305 × 88 | 88,5 | 301,7 | 307,8 | 12,4 | 12,3 | 112,1 |
HP 305 × 95 | 94,9 | 303,7 | 308,7 | 13,3 | 13,3 | 121,0 |
HP 305 × 110 | 110 | 307,9 | 310,7 | 15,3 | 15,4 | 140,1 |
HP 305 × 126 | 126 | 312,3 | 312,9 | 17,5 | 17,6 | 160,6 |
HP 305 × 149 | 149 | 318,5 | 316,0 | 20,6 | 20,7 | 189,9 |
HP 305 × 180 | 180 | 326,7 | 319,7 | 24,8 | 24,8 | 229,3 |
HP 305 × 186 | 186 | 328,3 | 320,9 | 25,5 | 25,6 | 236,9 |
HP 305 × 223 | 223 | 337,9 | 325,7 | 30,3 | 30,4 | 284,0 |
HP 320 × 88 | 88,5 | 303,0 | 304,0 | 12,0 | 12,0 | 112,7 |
HP 320 × 103 | 103 | 307,0 | 306,0 | 14,0 | 14,0 | 131,0 |
HP 320 × 117 | 117 | 311,0 | 308,0 | 16,0 | 16,0 | 149,5 |
HP 320 × 147 | 147 | 319,0 | 312,0 | 20,0 | 20,0 | 186,9 |
HP 320 × 184 | 184 | 329,0 | 317,0 | 25,0 | 25,0 | 234,5 |
HP 360 × 109 | 109 | 346,4 | 371,0 | 12,8 | 12,9 | 138,7 |
HP 360 × 133 | 133 | 352,0 | 373,8 | 15,6 | 15,7 | 169,4 |
HP 360 × 152 | 152 | 356,4 | 376,0 | 17,8 | 17,9 | 193,7 |
HP 360 × 174 | 174 | 361,4 | 378,5 | 20,3 | 20,4 | 221,5 |
HP 360 × 180 | 180 | 362,9 | 378,8 | 21,1 | 21,1 | 229,5 |
HP 400 × 122 | 122 | 348,0 | 390,0 | 14,0 | 14,0 | 155,9 |
HP 400 × 140 | 140 | 352,0 | 392,0 | 16,0 | 16,0 | 178,6 |
HP 400 × 158 | 158 | 356,0 | 394,0 | 18,0 | 18,0 | 201,4 |
HP 400 × 176 | 176 | 360,0 | 396,0 | 20,0 | 20,0 | 224,3 |
HP 400 × 194 | 194 | 364,0 | 398,0 | 22,0 | 22,0 | 247,5 |
HP 400 × 213 | 213 | 368,0 | 400,0 | 24,0 | 24,0 | 270,7 |
HP 400 × 231 | 231 | 372,0 | 402,0 | 26,0 | 26,0 | 294,2 |
HP 460 × 202 | 202 | 445,0 | 451,0 | 19,1 | 19,1 | 257,0 |
HP 460 × 234 | 234 | 451,0 | 454,0 | 22,1 | 22,1 | 298,0 |
HP 460 × 269 | 269 | 457,0 | 457,0 | 25,4 | 25,4 | 343,0 |
HP 460 × 304 | 304 | 464,0 | 460,0 | 28,6 | 28,6 | 387,0 |
Table 6 — Wide flange bearing piles UBP
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
UBP 203 × 203 × 45 | 44,9 | 200,2 | 205,9 | 9,5 | 9,5 | 57,2 |
UBP 203 × 203 × 54 | 53,9 | 204,0 | 207,7 | 11,3 | 11,4 | 68,7 |
UBP 254 × 254 × 63 | 63,0 | 247,1 | 256,6 | 10,6 | 10,7 | 80,2 |
UBP 254 × 254 × 71 | 71,0 | 249,7 | 258,0 | 12,0 | 12,0 | 90,4 |
UBP 254 × 254 × 85 | 85,1 | 254,3 | 260,4 | 14,4 | 14,3 | 108,4 |
UBP 305 × 305 × 79 | 78,9 | 299,3 | 306,4 | 11,0 | 11,1 | 100,5 |
UBP 305 × 305 × 88 | 88,0 | 301,7 | 307,8 | 12,4 | 12,3 | 112,1 |
UBP 305 × 305 × 95 | 94,9 | 303,7 | 308,7 | 13,3 | 13,3 | 120,9 |
UBP 305 × 305 × 110 | 110 | 307,9 | 310,7 | 15,3 | 15,4 | 140,1 |
UBP 305 × 305 × 126 | 126 | 312,3 | 312,9 | 17,5 | 17,6 | 160,6 |
UBP 305 × 305 × 149 | 149 | 318,5 | 316,0 | 20,6 | 20,7 | 189,9 |
UBP 305 × 305 × 186 | 186 | 328,3 | 320,9 | 25,5 | 25,6 | 236,9 |
UBP 305 × 305 × 223 | 223 | 337,9 | 325,7 | 30,3 | 30,4 | 284,0 |
UBP 356 × 368 × 109 | 109 | 346,4 | 371,0 | 12,8 | 12,9 | 138,7 |
UBP 356 × 368 × 133 | 133 | 352,0 | 373,8 | 15,6 | 15,7 | 169,4 |
UBP 356 × 368 × 152 | 152 | 356,4 | 376,0 | 17,8 | 17,9 | 193,7 |
UBP 356 × 368 × 174 | 174 | 361,4 | 378,5 | 20,3 | 20,4 | 221,5 |
UBP 406 x 406 x 131 | 131 | 389,0 | 398,0 | 13,7 | 13,7 | 162,0 |
UBP 406 x 406 x 151 | 151 | 394,0 | 400,0 | 15,9 | 15,9 | 188,2 |
UBP 406 x 406 x 181 | 181 | 400,0 | 403,0 | 19,1 | 19,1 | 226,5 |
UBP 406 x 406 x 211 | 211 | 406,0 | 406,0 | 22,2 | 22,2 | 264,0 |
UBP 406 x 406 x 242 | 242 | 413,0 | 410,0 | 25,4 | 25,4 | 303,7 |
UBP 406 x 406 x 272 | 272 | 419,0 | 413,0 | 28,6 | 28,6 | 343,1 |
UBP 460 × 460 × 202 | 202 | 445,0 | 451,0 | 19,1 | 19,1 | 257,0 |
UBP 460 × 460 × 234 | 234 | 451,0 | 454,0 | 22,1 | 22,1 | 298,0 |
UBP 460 × 460 × 269 | 269 | 457,0 | 457,0 | 25,4 | 25,4 | 343,0 |
UBP 460 × 460 × 304 | 304 | 464,0 | 460,0 | 28,6 | 28,6 | 387,0 |
Table 7 — Universal beams UB
Designation |
| Dimensions |
| |||
|---|---|---|---|---|---|---|
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
UB 127 × 76 × 13 | 13,0 | 127,0 | 76,0 | 4,0 | 7,6 | 16,5 |
UB 152 × 89 × 16 | 16,0 | 152,4 | 88,7 | 4,5 | 7,7 | 20,3 |
UB 178 × 102 × 19 | 19,0 | 177,8 | 101,2 | 4,8 | 7,9 | 24,3 |
UB 203 × 102 × 23 | 23,1 | 203,2 | 101,8 | 5,4 | 9,3 | 29,4 |
UB 203 × 133 × 25 | 25,1 | 203,2 | 133,2 | 5,7 | 7,8 | 32,0 |
UB 203 × 133 × 30 | 30,0 | 206,8 | 133,9 | 6,4 | 9,6 | 38,2 |
UB 254 × 102 × 22 | 22,0 | 254,0 | 101,6 | 5,7 | 6,8 | 28,0 |
UB 254 × 102 × 25 | 25,2 | 257,2 | 101,9 | 6,0 | 8,4 | 32,0 |
UB 254 × 102 × 28 | 28,3 | 260,4 | 102,2 | 6,3 | 10,0 | 36,1 |
UB 254 × 146 × 31 | 31,1 | 251,4 | 146,1 | 6,0 | 8,6 | 39,7 |
UB 254 × 146 × 37 | 37,0 | 256,0 | 146,4 | 6,3 | 10,9 | 47,2 |
UB 254 × 146 × 43 | 43,0 | 259,6 | 147,3 | 7,2 | 12,7 | 54,8 |
UB 305 × 102 × 25 | 24,8 | 305,1 | 101,6 | 5,8 | 7,0 | 31,6 |
UB 305 × 102 × 28 | 28,2 | 308,7 | 101,8 | 6,0 | 8,8 | 35,9 |
UB 305 × 102 × 33 | 32,8 | 312,7 | 102,4 | 6,6 | 10,8 | 41,8 |
UB 305 × 127 × 37 | 37,0 | 304,4 | 123,4 | 7,1 | 10,7 | 47,2 |
UB 305 × 127 × 42 | 41,9 | 307,2 | 124,3 | 8,0 | 12,1 | 53,4 |
UB 305 × 127 × 48 | 48,1 | 311,0 | 125,3 | 9,0 | 14,0 | 61,2 |
UB 305 × 165 × 40 | 40,3 | 303,4 | 165,0 | 6,0 | 10,2 | 51,3 |
UB 305 × 165 × 46 | 46,1 | 306,6 | 165,7 | 6,7 | 11,8 | 58,7 |
UB 305 × 165 × 54 | 54,0 | 310,4 | 166,9 | 7,9 | 13,7 | 68,8 |
UB 356 × 127 × 33 | 33,1 | 349,0 | 125,4 | 6,0 | 8,5 | 42,1 |
UB 356 × 127 × 39 | 39,1 | 353,4 | 126,0 | 6,6 | 10,7 | 49,8 |
UB 356 × 171 × 45 | 45,0 | 351,4 | 171,1 | 7,0 | 9,7 | 57,3 |
UB 356 × 171 × 51 | 51,0 | 355,0 | 171,5 | 7,4 | 11,5 | 64,9 |
UB 356 × 171 × 57 | 57,0 | 358,0 | 172,2 | 8,1 | 13,0 | 72,6 |
UB 356 × 171 × 67 | 67,1 | 363,4 | 173,2 | 9,1 | 15,7 | 85,5 |
UB 406 × 140 × 39 | 39,0 | 398,0 | 141,8 | 6,4 | 8,6 | 49,7 |
UB 406 × 140 × 46 | 46,0 | 403,2 | 142,2 | 6,8 | 11,2 | 58,6 |
UB 406 x 140 x 53 | 53,3 | 406,6 | 143,3 | 7,9 | 12,9 | 68,0 |
UB 406 × 178 × 54 | 54,1 | 402,6 | 177,7 | 7,7 | 10,9 | 69,0 |
UB 406 × 178 × 60 | 60,1 | 406,4 | 177,9 | 7,9 | 12,8 | 76,5 |
UB 406 × 178 × 67 | 67,1 | 409,4 | 178,8 | 8,8 | 14,3 | 85,5 |
UB 406 × 178 × 74 | 74,2 | 412,8 | 179,5 | 9,5 | 16,0 | 94,5 |
UB 406 x 178 x 85 | 85,0 | 417,0 | 181,0 | 10,9 | 18,2 | 108,2 |
UB 457 × 152 × 52 | 52,3 | 449,8 | 152,4 | 7,6 | 10,9 | 66,6 |
UB 457 × 152 × 60 | 59,8 | 454,6 | 152,9 | 8,1 | 13,3 | 76,2 |
UB 457 × 152 × 67 | 67,2 | 458,0 | 153,8 | 9,0 | 15,0 | 85,6 |
UB 457 × 152 × 74 | 74,2 | 462,0 | 154,4 | 9,6 | 17,0 | 94,5 |
UB 457 × 152 × 82 | 82,1 | 465,8 | 155,3 | 10,5 | 18,9 | 104,5 |
UB 457 × 191 × 67 | 67,1 | 453,4 | 189,9 | 8,5 | 12,7 | 85,5 |
UB 457 × 191 × 74 | 74,3 | 457,0 | 190,4 | 9,0 | 14,5 | 94,6 |
UB 457 × 191 × 82 | 82,0 | 460,0 | 191,3 | 9,9 | 16,0 | 104,5 |
UB 457 × 191 × 89 | 89,3 | 463,4 | 191,9 | 10,5 | 17,7 | 113,8 |
UB 457 × 191 × 98 | 98,3 | 467,2 | 192,8 | 11,4 | 19,6 | 125,3 |
UB 457 x 191 x 106 | 106 | 469,0 | 194,0 | 12,6 | 20,6 | 134,7 |
UB 457 x 191 x 133 | 133 | 480,6 | 196,7 | 15,3 | 26,3 | 170,0 |
UB 457 x 191 x 161 | 161 | 492,0 | 199,4 | 18,0 | 32,0 | 206,0 |
UB 457 x 279 x 113 | 113 | 463,0 | 280,0 | 10,8 | 17,3 | 146,6 |
UB 457 x 279 x 128 | 128 | 467,0 | 282,0 | 12,2 | 19,6 | 166,2 |
UB 457 x 279 x 144 | 144 | 472,0 | 283,0 | 13,6 | 22,1 | 186,7 |
UB 457 x 279 x 158 | 158 | 476,0 | 284,0 | 15,0 | 23,9 | 203,4 |
UB 457 x 279 x 177 | 177 | 482,0 | 286,0 | 16,6 | 26,9 | 228,4 |
UB 457 x 279 x 193 | 193 | 489,0 | 283,0 | 17,0 | 30,5 | 248,8 |
UB 457 x 279 x 213 | 213 | 495,0 | 285,0 | 18,5 | 33,5 | 273,6 |
UB 457 x 279 x 235 | 235 | 501,0 | 287,0 | 20,6 | 36,6 | 301,6 |
UB 457 x 279 x 260 | 260 | 509,0 | 289,0 | 22,6 | 40,4 | 333,7 |
UB 457 x 279 x 286 | 286 | 517,0 | 291,0 | 24,4 | 44,4 | 366,3 |
UB 457 x 279 x 315 | 315 | 525,0 | 293,0 | 26,9 | 48,5 | 402,8 |
UB 457 x 279 x 349 | 349 | 535,0 | 296,0 | 29,5 | 53,6 | 446,9 |
UB 457 x 279 x 384 | 384 | 545,0 | 299,0 | 32,5 | 58,4 | 491,8 |
UB 457 x 279 x 421 | 421 | 555,0 | 302,0 | 35,6 | 63,5 | 539,3 |
UB 457 x 279 x 464 | 464 | 567,0 | 305,0 | 38,6 | 69,6 | 593,1 |
UB 533 x 165 x 66 | 66,0 | 525,0 | 165,0 | 8,9 | 11,4 | 83,8 |
UB 533 x 165 x 74 | 74,0 | 529,0 | 166,0 | 9,7 | 13,6 | 95,3 |
UB 533 x 165 x 85 | 85,0 | 535,0 | 166,0 | 10,3 | 16,5 | 107,9 |
UB 533 × 210 × 82 | 82,2 | 528,3 | 208,8 | 9,6 | 13,2 | 104,7 |
UB 533 × 210 × 92 | 92,1 | 533,1 | 209,3 | 10,1 | 15,6 | 117,4 |
UB 533 × 210 × 101 | 101 | 536,7 | 210,0 | 10,8 | 17,4 | 128,7 |
UB 533 × 210 × 109 | 109 | 539,5 | 210,8 | 11,6 | 18,8 | 138,9 |
UB 533 × 210 × 122 | 122 | 544,5 | 211,9 | 12,7 | 21,3 | 155,4 |
UB 533 x 312 x 150 | 150 | 543,0 | 312,0 | 12,7 | 20,3 | 195,8 |
UB 533 x 312 x 165 | 165 | 546,0 | 313,0 | 14,0 | 22,2 | 214,6 |
UB 533 x 312 x 182 | 182 | 551,0 | 315,0 | 15,2 | 24,4 | 235,4 |
UB 533 x 312 x 196 | 196 | 554,0 | 316,0 | 16,5 | 26,3 | 254,3 |
UB 533 x 312 x 219 | 219 | 560,0 | 318,0 | 18,3 | 29,2 | 282,9 |
UB 533 x 312 x 248 | 248 | 571,0 | 315,0 | 19,0 | 34,5 | 318,1 |
UB 533 x 312 x 272 | 272 | 577,0 | 317,0 | 21,1 | 37,6 | 349,6 |
UB 533 x 312 x 300 | 300 | 585,0 | 319,0 | 23,1 | 41,4 | 385,5 |
UB 533 x 312 x 332 | 332 | 593,0 | 322,0 | 25,4 | 45,5 | 425,9 |
UB 533 x 312 x 369 | 369 | 603,0 | 324,0 | 27,9 | 50,5 | 472,7 |
UB 533 x 312 x 409 | 409 | 613,0 | 327,0 | 31,0 | 55,6 | 524,5 |
UB 610 x 178 x 82 | 82,0 | 599,0 | 178,0 | 10,0 | 12,8 | 104,4 |
UB 610 x 178 x 92 | 92,0 | 603,0 | 179,0 | 10,9 | 15,0 | 117,6 |
UB 610 × 229 × 101 | 101 | 602,6 | 227,6 | 10,5 | 14,8 | 128,9 |
UB 610 × 229 × 113 | 113 | 607,6 | 228,2 | 11,1 | 17,3 | 143,9 |
UB 610 × 229 × 125 | 125 | 612,2 | 229,0 | 11,9 | 19,6 | 159,3 |
UB 610 × 229 × 140 | 140 | 617,2 | 230,2 | 13,1 | 22,1 | 178,2 |
UB 610 x 229 x 153 | 153 | 623,0 | 229,0 | 14,0 | 24,9 | 197,7 |
UB 610 × 305 × 149 | 149 | 612,4 | 304,8 | 11,8 | 19,7 | 190,0 |
UB 610 × 305 × 179 | 179 | 620,2 | 307,1 | 14,1 | 23,6 | 228,1 |
UB 610 × 305 × 238 | 238 | 635,8 | 311,4 | 18,4 | 31,4 | 303,3 |
UB 610 x 325 x 155 | 155 | 611,0 | 324,0 | 12,7 | 19,0 | 199,3 |
UB 610 x 325 x 174 | 174 | 616,0 | 325,0 | 14,0 | 21,6 | 224,0 |
UB 610 x 325 x 195 | 195 | 622,0 | 327,0 | 15,4 | 24,4 | 251,3 |
UB 610 x 325 x 217 | 217 | 628,0 | 328,0 | 16,5 | 27,7 | 279,6 |
UB 610 x 325 x 241 | 241 | 635,0 | 329,0 | 17,9 | 31,0 | 310,0 |
UB 610 x 325 x 262 | 262 | 641,0 | 327,0 | 19,0 | 34,0 | 334,7 |
UB 610 x 325 x 285 | 285 | 647,0 | 329,0 | 20,6 | 37,1 | 365,5 |
UB 610 x 325 x 307 | 307 | 653,0 | 330,0 | 22,1 | 39,9 | 393,5 |
UB 610 x 325 x 341 | 341 | 661,0 | 333,0 | 24,4 | 43,9 | 435,7 |
UB 610 x 325 x 372 | 372 | 669,0 | 335,0 | 26,4 | 48,0 | 476,3 |
UB 610 x 325 x 415 | 415 | 679,0 | 338,0 | 29,5 | 53,1 | 531,4 |
UB 610 x 325 x 455 | 455 | 689,0 | 340,0 | 32,0 | 57,9 | 580,6 |
UB 610 x 325 x 498 | 498 | 699,0 | 343,0 | 35,1 | 63,0 | 636,7 |
UB 610 x 325 x 551 | 551 | 711,0 | 347,0 | 38,6 | 69,1 | 704,1 |
UB 686 × 254 × 125 | 125 | 677,9 | 253,0 | 11,7 | 16,2 | 159,5 |
UB 686 × 254 × 140 | 140 | 683,5 | 253,7 | 12,4 | 19,0 | 178,4 |
UB 686 × 254 × 152 | 152 | 687,5 | 254,5 | 13,2 | 21,0 | 194,1 |
UB 686 × 254 × 170 | 170 | 692,9 | 255,8 | 14,5 | 23,7 | 216,8 |
UB 686 x 254 x 192 | 192 | 702,0 | 254,0 | 15,5 | 27,9 | 245,0 |
UB 690 x 360 x 217 | 217 | 695,0 | 355,0 | 15,4 | 24,8 | 278,9 |
UB 690 x 360 x 240 | 240 | 701,0 | 356,0 | 16,8 | 27,4 | 307,1 |
UB 690 x 360 x 265 | 265 | 706,0 | 358,0 | 18,4 | 30,2 | 338,5 |
UB 690 x 360 x 289 | 289 | 714,0 | 356,0 | 19,0 | 34,0 | 368,3 |
UB 690 x 360 x 323 | 323 | 722,0 | 359,0 | 21,1 | 38,1 | 413,3 |
UB 690 x 360 x 350 | 350 | 728,0 | 360,0 | 23,1 | 40,9 | 447,2 |
UB 690 x 360 x 384 | 384 | 736,0 | 362,0 | 24,9 | 45,0 | 490,1 |
UB 690 x 360 x 419 | 419 | 744,0 | 364,0 | 26,9 | 49,0 | 533,9 |
UB 690 x 360 x 457 | 457 | 752,0 | 367,0 | 29,5 | 53,1 | 583,7 |
UB 690 x 360 x 500 | 500 | 762,0 | 369,0 | 32,0 | 57,9 | 637,5 |
UB 690 x 360 x 548 | 548 | 772,0 | 372,0 | 35,1 | 63,0 | 698,9 |
UB 690 x 360 x 802 | 802 | 826,0 | 387,0 | 50,0 | 89,9 | 1022,4 |
UB 760 x 380 x 257 | 257 | 772,0 | 381,0 | 16,6 | 27,1 | 329,1 |
UB 760 x 380 x 284 | 284 | 780,0 | 382,0 | 18,0 | 30,1 | 363,0 |
UB 760 x 380 x 314 | 314 | 786,0 | 384,0 | 19,7 | 33,4 | 401,6 |
UB 760 x 380 x 350 | 350 | 795,0 | 382,0 | 21,1 | 38,1 | 446,2 |
UB 760 x 380 x 389 | 389 | 803,0 | 385,0 | 23,6 | 41,9 | 495,8 |
UB 760 x 380 x 434 | 434 | 813,0 | 387,0 | 25,9 | 47,0 | 553,4 |
UB 760 x 380 x 484 | 484 | 823,0 | 390,0 | 29,0 | 52,1 | 618,3 |
UB 760 x 380 x 531 | 531 | 833,0 | 393,0 | 31,5 | 56,9 | 677,2 |
UB 760 x 380 x 582 | 582 | 843,0 | 396,0 | 34,5 | 62,0 | 742,5 |
UB 762 × 267 × 134 | 134 | 750,0 | 264,4 | 12,0 | 15,5 | 170,6 |
UB 762 × 267 × 147 | 147 | 754,0 | 265,2 | 12,8 | 17,5 | 187,2 |
UB 762 x 267 x 161 | 161 | 758,0 | 266,0 | 13,8 | 19,3 | 205,0 |
UB 762 × 267 × 173 | 173 | 762,2 | 266,7 | 14,3 | 21,6 | 220,4 |
UB 762 x 267 x 185 | 185 | 766,0 | 267,0 | 14,9 | 23,6 | 237,0 |
UB 762 × 267 × 197 | 197 | 769,8 | 268,0 | 15,6 | 25,4 | 250,6 |
UB 762 x 267 x 220 | 220 | 779,0 | 266,0 | 16,5 | 30,0 | 280,7 |
UB 838 × 292 × 176 | 176 | 834,9 | 291,7 | 14,0 | 18,8 | 224,0 |
UB 838 × 292 × 194 | 194 | 840,7 | 292,4 | 14,7 | 21,7 | 246,8 |
UB 838 x 292 x 210 | 210 | 846,0 | 293,0 | 15,4 | 24,4 | 269,0 |
UB 838 × 292 × 226 | 226 | 850,9 | 293,8 | 16,1 | 26,8 | 288,6 |
UB 838 x 292 x 251 | 251 | 859,0 | 292,0 | 17,0 | 31,0 | 320,0 |
UB 840 x 400 x 299 | 299 | 856,0 | 400,0 | 18,2 | 29,2 | 382,2 |
UB 840 x 400 x 329 | 329 | 862,0 | 401,0 | 19,7 | 32,4 | 420,3 |
UB 840 x 400 x 359 | 359 | 868,0 | 403,0 | 21,1 | 35,6 | 458,5 |
UB 840 x 400 x 392 | 392 | 877,0 | 401,0 | 22,1 | 39,9 | 499,6 |
UB 840 x 400 x 433 | 433 | 885,0 | 404,0 | 24,4 | 43,9 | 552,7 |
UB 840 x 400 x 473 | 473 | 893,0 | 406,0 | 26,4 | 48,0 | 603,6 |
UB 840 x 400 x 527 | 527 | 903,0 | 409,0 | 29,5 | 53,1 | 672,8 |
UB 840 x 400 x 576 | 576 | 913,0 | 411,0 | 32,0 | 57,9 | 734,5 |
UB 914 × 305 × 201 | 201 | 903,0 | 303,3 | 15,1 | 20,2 | 255,9 |
UB 914 × 305 × 224 | 224 | 910,4 | 304,1 | 15,9 | 23,9 | 285,6 |
UB 914 × 305 × 238 | 238 | 915,0 | 305,0 | 16,5 | 25,9 | 303,5 |
UB 914 × 305 × 253 | 253 | 918,4 | 305,5 | 17,3 | 27,9 | 322,8 |
UB 914 × 305 × 271 | 271 | 923,0 | 307,0 | 18,4 | 30,0 | 346,1 |
UB 914 × 305 × 289 | 289 | 926,6 | 307,7 | 19,5 | 32,0 | 368,3 |
UB 914 × 305 × 313 | 313 | 932,0 | 309,0 | 21,1 | 34,5 | 398,4 |
UB 914 × 305 × 345 | 345 | 943,0 | 308,0 | 22,1 | 39,9 | 439,7 |
UB 914 × 305 × 381 | 381 | 951,0 | 310,0 | 24,4 | 43,9 | 485,9 |
UB 914 × 305 × 425 | 425 | 961,0 | 313,0 | 26,9 | 49,0 | 542,0 |
UB 914 × 305 × 474 | 474 | 971,0 | 316,0 | 30,0 | 54,1 | 603,9 |
UB 914 × 305 × 521 | 521 | 981,0 | 319,0 | 33,0 | 58,9 | 663,7 |
UB 914 × 305 × 576 | 576 | 993,0 | 322,0 | 36,1 | 65,0 | 733,2 |
UB 914 × 419 × 343 | 343 | 911,8 | 418,5 | 19,4 | 32,0 | 437,3 |
UB 914 × 419 × 388 | 388 | 921,0 | 420,5 | 21,4 | 36,6 | 494,2 |
UB 920 x 420 x 344 | 344 | 927 | 418 | 19,3 | 32 | 437,2 |
UB 920 x 420 x 368 | 368 | 931 | 419 | 20,3 | 34,3 | 465,6 |
UB 920 x 420 x 390 | 390 | 936 | 420 | 21,3 | 36,6 | 494,3 |
UB 920 x 420 x 420 | 420 | 943 | 422 | 22,5 | 39,9 | 534,1 |
UB 920 x 420 x 449 | 449 | 948 | 423 | 24 | 42,7 | 571,4 |
UB 920 x 420 x 491 | 491 | 957 | 422 | 25,9 | 47 | 623,3 |
UB 920 x 420 x 537 | 537 | 965 | 425 | 28,4 | 51,1 | 682,5 |
UB 920 x 420 x 588 | 588 | 975 | 427 | 31 | 55,9 | 748,1 |
UB 920 x 420 x 656 | 656 | 987 | 431 | 34,5 | 62 | 835,3 |
UB 920 x 420 x 725 | 725 | 999 | 434 | 38,1 | 68,1 | 922,9 |
UB 920 x 420 x 787 | 787 | 1011 | 437 | 40,9 | 73,9 | 1002 |
UB 920 x 420 x 970 | 970 | 1043 | 446 | 50 | 89,9 | 1236,6 |
UB 920 x 420 x 1077 | 1077 | 1061 | 451 | 55 | 99,1 | 1371,5 |
UB 920 x 420 x 1194 | 1194 | 1081 | 457 | 60,5 | 109 | 1521,5 |
UB 920 x 420 x 1269 | 1269 | 1093 | 461 | 64 | 115,1 | 1616,5 |
UB 920 x 420 x 1377 | 1377 | 1093 | 473 | 76,7 | 115,1 | 1753,7 |
UB 1000 x 400 x 296 | 296 | 982,0 | 400,0 | 16,5 | 27,1 | 377,6 |
UB 1000 x 400 x 321 | 321 | 990,0 | 400,0 | 16,5 | 31,0 | 408,8 |
UB 1000 x 400 x 371 | 371 | 1000,0 | 400,0 | 19,0 | 36,1 | 472,8 |
UB 1000 x 400 x 412 | 412 | 1008,0 | 402,0 | 21,1 | 40,0 | 525,1 |
UB 1000 x 400 x 443 | 443 | 1012,0 | 402,0 | 23,6 | 41,9 | 563,7 |
UB 1000 x 400 x 483 | 483 | 1020,0 | 404,0 | 25,4 | 46,0 | 615,1 |
UB 1000 x 400 x 539 | 539 | 1030,0 | 407,0 | 28,4 | 51,1 | 687,2 |
UB 1000 x 400 x 554 | 554 | 1032,0 | 408,0 | 29,5 | 52,0 | 705,8 |
UB 1000 x 400 x 591 | 591 | 1040,0 | 409,0 | 31,0 | 55,9 | 752,7 |
UB 1000 x 400 x 642 | 642 | 1048,0 | 412,0 | 34,0 | 60,0 | 817,6 |
UB 1000 x 400 x 748 | 748 | 1068,0 | 417,0 | 39,0 | 70,0 | 953,4 |
UB 1000 x 400 x 883 | 883 | 1092,0 | 424,0 | 45,5 | 82,0 | 1125,3 |
UB 1000 x 400 x 976 | 976 | 1108,0 | 428,0 | 50,0 | 89,9 | 1241,4 |
UB 1016 × 305 × 222 | 222 | 970,0 | 300,0 | 16,0 | 21,1 | 282,8 |
UB 1016 × 305 × 249 | 249 | 980,0 | 300,0 | 16,5 | 26,0 | 316,8 |
UB 1016 × 305 × 272 | 272 | 990,0 | 300,0 | 16,5 | 31,0 | 346,8 |
UB 1016 × 305 × 314 | 314 | 1000,0 | 300,0 | 19,1 | 35,9 | 400,4 |
UB 1016 × 305 × 350 | 350 | 1008,0 | 302,0 | 21,1 | 40,0 | 445,1 |
UB 1016 × 305 × 393 | 393 | 1016,0 | 303,0 | 24,4 | 43,9 | 500,2 |
UB 1016 × 305 × 415 | 415 | 1020,0 | 304,0 | 26,0 | 46,0 | 528,7 |
UB 1016 × 305 × 438 | 438 | 1026,0 | 305,0 | 26,9 | 49,0 | 556,3 |
UB 1016 × 305 × 494 | 494 | 1036,0 | 309,0 | 31,0 | 54,0 | 629,1 |
UB 1016 × 305 × 584 | 584 | 1056,0 | 314,0 | 36,0 | 64,0 | 743,7 |
UB 1100 x 400 x 343 | 343 | 1090,0 | 400,0 | 18,0 | 31,0 | 436,5 |
UB 1100 x 400 x 390 | 390 | 1100,0 | 400,0 | 20,0 | 36,0 | 497,0 |
UB 1100 x 400 x 433 | 433 | 1108,0 | 402,0 | 22,0 | 40,0 | 551,2 |
UB 1100 x 400 x 499 | 499 | 1118,0 | 405,0 | 26,0 | 45,0 | 635,2 |
UB 1100 x 400 x 548 | 548 | 1128,0 | 407,0 | 28,0 | 50,0 | 698,3 |
UB 1100 x 400 x 607 | 607 | 1138,0 | 410,0 | 31,0 | 55,0 | 773,1 |
Table 8 — Universal columns UC
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
UC 152 × 152 × 23 | 23,0 | 152,4 | 152,2 | 5,8 | 6,8 | 29,2 |
UC 152 × 152 × 30 | 30,0 | 157,6 | 152,9 | 6,5 | 9,4 | 38,3 |
UC 152 × 152 × 37 | 37,0 | 161,8 | 154,4 | 8,0 | 11,5 | 47,1 |
UC 152 x 152 x 44 | 44,0 | 166,0 | 155,9 | 9,5 | 13,6 | 56,1 |
UC 152 x 152 x 51 | 51,0 | 170,2 | 157,4 | 11,0 | 15,7 | 65,2 |
UC 203 × 203 × 46 | 46,1 | 203,2 | 203,6 | 7,2 | 11,0 | 58,7 |
UC 203 × 203 × 52 | 52,0 | 206,2 | 204,3 | 7,9 | 12,5 | 66,3 |
UC 203 × 203 × 60 | 60,0 | 209,6 | 205,8 | 9,4 | 14,2 | 76,4 |
UC 203 × 203 × 71 | 71,0 | 215,8 | 206,4 | 10,0 | 17,3 | 90,4 |
UC 203 × 203 × 86 | 86,1 | 222,2 | 209,1 | 12,7 | 20,5 | 109,6 |
UC 203 x 203 x 100 | 100 | 229,0 | 210,0 | 14,5 | 23,7 | 126,7 |
UC 203 x 203 x 113 | 113.5 | 235.0 | 212.1 | 16.3 | 26.9 | 145.0 |
UC 254 × 254 × 73 | 73,1 | 254,1 | 254,6 | 8,6 | 14,2 | 93,1 |
UC 254 x 254 x 81 | 81,0 | 256,0 | 255,0 | 9,4 | 15,6 | 102,0 |
UC 254 × 254 × 89 | 88,9 | 260,3 | 256,3 | 10,3 | 17,3 | 113,3 |
UC 254 x 254 x 101 | 101 | 264,0 | 257,0 | 11,9 | 19,6 | 128,9 |
UC 254 × 254 × 107 | 107 | 266,7 | 258,8 | 12,8 | 20,5 | 136,4 |
UC 254 x 254 x 115 | 115 | 269,0 | 259,0 | 13,5 | 22,1 | 146,3 |
UC 254 × 254 × 132 | 132 | 276,3 | 261,3 | 15,3 | 25,3 | 168,1 |
UC 254 x 254 x 149 | 149 | 282,0 | 263,0 | 17,3 | 28,4 | 189,8 |
UC 254 × 254 × 167 | 167 | 289,1 | 265,2 | 19,2 | 31,7 | 212,9 |
UC 305 × 305 × 97 | 96,9 | 307,9 | 305,3 | 9,9 | 15,4 | 123,4 |
UC 305 x 305 x 107 | 107 | 311,0 | 306,0 | 10,9 | 17,0 | 137,7 |
UC 305 × 305 × 118 | 118 | 314,5 | 307,4 | 12,0 | 18,7 | 150,2 |
UC 305 x 305 x 129 | 129 | 318,0 | 308,0 | 13,1 | 20,6 | 166,6 |
UC 305 × 305 × 137 | 137 | 320,5 | 309,2 | 13,8 | 21,7 | 174,4 |
UC 305 x 305 x 143 | 143 | 323,0 | 309,0 | 14,0 | 22,9 | 183,8 |
UC 305 × 305 × 158 | 158 | 327,1 | 311,2 | 15,8 | 25,0 | 201,4 |
UC 305 x 305 x 179 | 179 | 333,0 | 313,0 | 18,0 | 28,1 | 229,2 |
UC 305 × 305 × 198 | 198 | 339,9 | 314,5 | 19,1 | 31,4 | 252,4 |
UC 305 x 305 x 202 | 202 | 341,0 | 315,0 | 20,1 | 31,8 | 259,5 |
UC 305 x 305 x 226 | 226 | 348,0 | 317,0 | 22,1 | 35,6 | 290,3 |
UC 305 × 305 × 240 | 240 | 352,5 | 318,4 | 23,0 | 37,7 | 305,8 |
UC 305 x 305 x 253 | 253 | 356,0 | 319,0 | 24,4 | 39,6 | 323,6 |
UC 305 × 305 × 283 | 283 | 365,3 | 322,2 | 26,8 | 44,1 | 360,4 |
UC 305 x 305 x 313 | 313 | 374,0 | 325,0 | 30,0 | 48,3 | 399,1 |
UC 305 x 305 x 342 | 342 | 382,0 | 328,0 | 32,6 | 52,6 | 437,2 |
UC 305 x 305 x 375 | 375 | 391,0 | 330,0 | 35,4 | 57,2 | 478,9 |
UC 305 x 305 x 415 | 415 | 403,0 | 334,0 | 38,9 | 62,7 | 530,3 |
UC 305 x 305 x 454 | 454 | 415,0 | 336,0 | 41,3 | 68,7 | 579,7 |
UC 305 x 305 x 500 | 500 | 427,0 | 340,0 | 45,1 | 75,1 | 639,0 |
UC 356 × 368 × 129 | 129 | 355,6 | 368,6 | 10,4 | 17,5 | 164,3 |
UC 356 x 368 x 134 | 134 | 356,0 | 369,0 | 11,2 | 18,0 | 170,6 |
UC 356 x 368 x 147 | 147 | 360,0 | 370,0 | 12,3 | 19,8 | 187,9 |
UC 356 × 368 × 153 | 153 | 362,0 | 370,5 | 12,3 | 20,7 | 194,8 |
UC 356 x 368 x 162 | 162 | 364,0 | 371,0 | 13,3 | 21,8 | 206,3 |
UC 356 × 368 × 177 | 177 | 368,2 | 372,6 | 14,4 | 23,8 | 225,5 |
UC 356 x 368 x 179 | 179 | 368,0 | 373,0 | 15,0 | 23,9 | 228,3 |
UC 356 x 368 x 196 | 196 | 372,0 | 374,0 | 16,4 | 26,2 | 250,3 |
UC 356 × 368 × 202 | 202 | 374,6 | 374,7 | 16,5 | 27,0 | 257,2 |
UC 356 x 406 x 216 | 216 | 375,0 | 394,0 | 17,3 | 27,7 | 275,5 |
UC 356 × 406 × 235 | 235 | 381,0 | 394,8 | 18,4 | 30,2 | 299,0 |
UC 356 x 406 x 237 | 237 | 380,0 | 395,0 | 18,9 | 30,2 | 300,9 |
UC 356 x 406 x 262 | 262 | 387,0 | 398,0 | 21,1 | 33,3 | 334,6 |
UC 356 × 406 × 287 | 287 | 393,6 | 399,0 | 22,6 | 36,5 | 365,7 |
UC 356 x 406 x 314 | 314 | 399,0 | 401,0 | 24,9 | 39,6 | 399,2 |
UC 356 × 406 × 340 | 340 | 406,4 | 403,0 | 26,6 | 42,9 | 433,0 |
UC 356 x 406 x 347 | 347 | 407,0 | 404,0 | 27,2 | 43,7 | 442,0 |
UC 356 x 406 x 382 | 382 | 416,0 | 406,0 | 29,8 | 48,0 | 487,1 |
UC 356 × 406 × 393 | 393 | 419,0 | 407,0 | 30,6 | 49,2 | 500,6 |
UC 356 x 406 x 421 | 421 | 425,0 | 409,0 | 32,8 | 52,6 | 537,1 |
UC 356 x 406 x 463 | 463 | 435,0 | 412,0 | 35,8 | 57,4 | 589,5 |
UC 356 × 406 × 467 | 467 | 436,6 | 412,2 | 35,8 | 58,0 | 594,9 |
UC 356 × 406 × 509 | 509 | 446,0 | 416,0 | 39,1 | 62,7 | 649,0 |
UC 356 × 406 × 551 | 551 | 455,6 | 418,5 | 42,1 | 67,5 | 701,9 |
UC 356 × 406 × 592 | 592 | 465,0 | 421,0 | 45,0 | 72,3 | 754,9 |
UC 356 × 406 × 634 | 634 | 474,6 | 424,0 | 47,6 | 77,0 | 807,5 |
UC 356 × 406 × 677 | 677 | 483,0 | 428,0 | 51,2 | 81,5 | 863,4 |
UC 356 × 406 × 744 | 744 | 498,0 | 432,0 | 55,6 | 88,9 | 948,1 |
UC 356 × 406 × 818 | 818 | 514,0 | 437,0 | 60,5 | 97,0 | 1043,3 |
UC 356 × 406 × 900 | 900 | 531,0 | 442,0 | 65,9 | 106,0 | 1149,2 |
UC 356 × 406 × 990 | 990 | 550,0 | 448,0 | 71,9 | 115,0 | 1262,4 |
UC 356 × 406 × 1086 | 1086 | 569,0 | 454,0 | 78,0 | 125,0 | 1385,8 |
UC 356 × 406 × 1202 | 1202 | 580,0 | 471,0 | 95,0 | 130,0 | 1530,6 |
UC 356 × 406 × 1299 | 1299 | 600,0 | 476,0 | 100,0 | 140,0 | 1654,8 |
UC 356 × 406 × 1384 | 1384 | 617,0 | 481,0 | 104,5 | 148,4 | 1760,0 |
UC 356 × 406 × 1488 | 1488 | 640,0 | 484,0 | 108,0 | 159,8 | 1890,0 |
Table 9 — Taper flange I sections IPN
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
IPN 80 | 5,9 | 80,0 | 42,0 | 3,9 | 5,9 | 7,6 |
IPN 100 | 8,3 | 100,0 | 50,0 | 4,5 | 6,8 | 10,6 |
IPN 120 | 11,1 | 120,0 | 58,0 | 5,1 | 7,7 | 14,2 |
IPN 140 | 14,3 | 140,0 | 66,0 | 5,7 | 8,6 | 18,2 |
IPN 160 | 17,9 | 160,0 | 74,0 | 6,3 | 9,5 | 22,8 |
IPN 180 | 21,9 | 180,0 | 82,0 | 6,9 | 10,4 | 27,9 |
IPN 200 | 26,2 | 200,0 | 90,0 | 7,5 | 11,3 | 33,4 |
IPN 220 | 31,1 | 220,0 | 98,0 | 8,1 | 12,2 | 39,5 |
IPN 240 | 36,2 | 240,0 | 106,0 | 8,7 | 13,1 | 46,1 |
IPN 260 | 41,9 | 260,0 | 113,0 | 9,4 | 14,1 | 53,3 |
IPN 280 | 47,9 | 280,0 | 119,0 | 10,1 | 15,2 | 61,0 |
IPN 300 | 54,2 | 300,0 | 125,0 | 10,8 | 16,2 | 69,0 |
IPN 320 | 61,0 | 320,0 | 131,0 | 11,5 | 17,3 | 77,7 |
IPN 340 | 68,0 | 340,0 | 137,0 | 12,2 | 18,3 | 86,7 |
IPN 360 | 76,1 | 360,0 | 143,0 | 13,0 | 19,5 | 97,0 |
IPN 380 | 84,0 | 380,0 | 149,0 | 13,7 | 20,5 | 107,0 |
IPN 400 | 92,4 | 400,0 | 155,0 | 14,4 | 21,6 | 117,7 |
IPN 450 | 115 | 450,0 | 170,0 | 16,2 | 24,3 | 146,9 |
IPN 500 | 141 | 500,0 | 185,0 | 18,0 | 27,0 | 179,4 |
IPN 550 | 166 | 550,0 | 200,0 | 19,0 | 30,0 | 212,0 |
IPN 600 | 199 | 600,0 | 215,0 | 21,6 | 32,4 | 253,7 |
Table 10 — Taper flange I sections J
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
J 76 × 76 × 13 | 12,8 | 76,2 | 76,2 | 5,1 | 8,4 | 16,1 |
J 76 × 76 × 15 | 15,0 | 76,2 | 80,0 | 8,9 | 8,4 | 18,8 |
J 89 × 89 × 19 | 19,5 | 88,9 | 88,9 | 9,5 | 9,9 | 24,4 |
J 102 × 44 × 7 | 7,5 | 101,6 | 44,5 | 4,3 | 6,1 | 9,4 |
J 102 × 102 × 23 | 23,0 | 101,6 | 101,6 | 9,5 | 10,3 | 28,8 |
J 114 × 114 × 27 | 26,9 | 114,3 | 114,3 | 9,5 | 10,7 | 33,9 |
J 127 × 76 × 16 | 16,5 | 127,0 | 76,2 | 5,6 | 9,6 | 20,9 |
J 127 × 114 × 27 | 26,9 | 127,0 | 114,3 | 7,4 | 11,4 | 33,8 |
J 127 × 114 × 29 | 29,3 | 127,0 | 114,3 | 10,2 | 11,5 | 36,8 |
J 152 × 127 × 37 | 37,3 | 152,4 | 127,0 | 10,4 | 13,2 | 46,9 |
J 203 × 152 × 52 | 52,3 | 203,2 | 152,4 | 8,9 | 16,5 | 65,9 |
J 254 × 114 × 37 | 37,2 | 254,0 | 114,3 | 7,6 | 12,8 | 46,9 |
J 254 × 203 × 82 | 82,0 | 254,0 | 203,2 | 10,2 | 19,9 | 103,9 |
Table 11 — Parallel flange channels UPE
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
UPE 80 | 7,9 | 80,0 | 50,0 | 4,0 | 7,0 | 10,1 |
UPE 100 | 9,8 | 100,0 | 55,0 | 4,5 | 7,5 | 12,5 |
UPE 120 | 12,1 | 120,0 | 60,0 | 5,0 | 8,0 | 15,4 |
UPE 140 | 14,5 | 140,0 | 65,0 | 5,0 | 9,0 | 18,4 |
UPE 160 | 17,0 | 160,0 | 70,0 | 5,5 | 9,5 | 21,7 |
UPE 180 | 19,7 | 180,0 | 75,0 | 5,5 | 10,5 | 25,1 |
UPE 200 | 22,8 | 200,0 | 80,0 | 6,0 | 11,0 | 29,0 |
UPE 220 | 26,6 | 220,0 | 85,0 | 6,5 | 12,0 | 33,9 |
UPE 240 | 30,2 | 240,0 | 90,0 | 7,0 | 12,5 | 38,5 |
UPE 270 | 35,2 | 270,0 | 95,0 | 7,5 | 13,5 | 44,8 |
UPE 300 | 44,4 | 300,0 | 100,0 | 9,5 | 15,0 | 56,6 |
UPE 330 | 53,2 | 330,0 | 105,0 | 11,0 | 16,0 | 67,8 |
UPE 360 | 61,2 | 360,0 | 110,0 | 12,0 | 17,0 | 77,9 |
UPE 400 | 72,2 | 400,0 | 115,0 | 13,5 | 18,0 | 91,9 |
Table 12 — Parallel flange channels PFC
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
PFC 100 × 50 × 10 | 10,2 | 100,0 | 50,0 | 5,0 | 8,5 | 13,0 |
PFC 125 × 65 × 15 | 14,8 | 125,0 | 65,0 | 5,5 | 9,5 | 18,8 |
PFC 150 × 75 × 18 | 17,9 | 150,0 | 75,0 | 5,5 | 10,0 | 22,8 |
PFC 150 × 90 × 24 | 23,9 | 150,0 | 90,0 | 6,5 | 12,0 | 30,4 |
PFC 180 × 75 × 20 | 20,3 | 180,0 | 75,0 | 6,0 | 10,5 | 25,9 |
PFC 180 × 90 × 26 | 26,1 | 180,0 | 90,0 | 6,5 | 12,5 | 33,2 |
PFC 200 × 75 × 23 | 23,4 | 200,0 | 75,0 | 6,0 | 12,5 | 29,9 |
PFC 200 × 90 × 30 | 29,7 | 200,0 | 90,0 | 7,0 | 14,0 | 37,9 |
PFC 230 × 75 × 26 | 25,7 | 230,0 | 75,0 | 6,5 | 12,5 | 32,7 |
PFC 230 × 90 × 32 | 32,2 | 230,0 | 90,0 | 7,5 | 14,0 | 41,0 |
PFC 260 × 75 × 28 | 27,6 | 260,0 | 75,0 | 7,0 | 12,0 | 35,1 |
PFC 260 × 90 × 35 | 34,8 | 260,0 | 90,0 | 8,0 | 14,0 | 44,4 |
PFC 300 × 90 × 41 | 41,4 | 300,0 | 90,0 | 9,0 | 15,5 | 52,7 |
PFC 300 × 100 × 46 | 45,5 | 300,0 | 100,0 | 9,0 | 16,5 | 58,0 |
PFC 380 × 100 × 54 | 54,0 | 380,0 | 100,0 | 9,5 | 17,5 | 68,7 |
PFC 430 × 100 × 64 | 64,4 | 430,0 | 100,0 | 11,0 | 19,0 | 82,1 |
Table 13 — Taper flange channels UPN
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
UPN 50 | 5,6 | 50,0 | 38,0 | 5,0 | 7,0 | 7,1 |
UPN 65 | 7,1 | 65,0 | 42,0 | 5,5 | 7,5 | 9,0 |
UPN 80 | 8,6 | 80,0 | 45,0 | 6,0 | 8,0 | 11,0 |
UPN 100 | 10,6 | 100,0 | 50,0 | 6,0 | 8,5 | 13,5 |
UPN 120 | 13,4 | 120,0 | 55,0 | 7,0 | 9,0 | 17,0 |
UPN 140 | 16,0 | 140,0 | 60,0 | 7,0 | 10,0 | 20,4 |
UPN 160 | 18,8 | 160,0 | 65,0 | 7,5 | 10,5 | 24,0 |
UPN 180 | 22,0 | 180,0 | 70,0 | 8,0 | 11,0 | 28,0 |
UPN 200 | 25,3 | 200,0 | 75,0 | 8,5 | 11,5 | 32,2 |
UPN 220 | 29,4 | 220,0 | 80,0 | 9,0 | 12,5 | 37,4 |
UPN 240 | 33,2 | 240,0 | 85,0 | 9,5 | 13,0 | 42,3 |
UPN 260 | 37,9 | 260,0 | 90,0 | 10,0 | 14,0 | 48,3 |
UPN 280 | 41,8 | 280,0 | 95,0 | 10,0 | 15,0 | 53,3 |
UPN 300 | 46,2 | 300,0 | 100,0 | 10,0 | 16,0 | 58,8 |
UPN 320 | 59,5 | 320,0 | 100,0 | 14,0 | 17,5 | 75,8 |
UPN 350 | 60,6 | 350,0 | 100,0 | 14,0 | 16,0 | 77,3 |
UPN 380 | 63,1 | 380,0 | 102,0 | 13,5 | 16,0 | 80,4 |
UPN 400 | 71,8 | 400,0 | 110,0 | 14,0 | 18,0 | 91,5 |
Table 14 — Taper flange channels U
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
U 40 × 20 × 4 | 2,6 | 40,0 | 20,0 | 4,0 | 5,5 | 3,4 |
U 40 × 20 × 5 | 2,9 | 40,0 | 20,0 | 5,0 | 5,5 | 3,7 |
U 50 × 25 × 5 | 3,9 | 50,0 | 25,0 | 5,0 | 6,0 | 4,9 |
U 60 × 30 × 6 | 5,1 | 60,0 | 30,0 | 6,0 | 6,0 | 6,5 |
U 65 × 42 × 5,5 | 7,1 | 65,0 | 42,0 | 5,5 | 7,5 | 9,0 |
Table 15 — Taper flange channels CH
Designation |
| Dimensions |
| |||
| M | h | b | tw | tf | A |
| kg/m | mm | mm | mm | mm | cm2 |
CH 76 × 38 × 7 | 6,7 | 76,2 | 38,1 | 5,1 | 6,8 | 8,6 |
CH 102 × 51 × 10 | 10,4 | 101,6 | 50,8 | 6,1 | 7,6 | 13,1 |
CH 127 × 64 × 15 | 14,9 | 127,0 | 63,5 | 6,4 | 9,2 | 18,8 |
CH 152 × 76 × 18 | 17,9 | 152,4 | 76,2 | 6,4 | 9,0 | 22,5 |
CH 152 × 89 × 24 | 23,9 | 152,4 | 88,9 | 7,1 | 11,6 | 30,0 |
CH 178 × 76 × 21 | 20,8 | 177,8 | 76,2 | 6,6 | 10,3 | 26,4 |
CH 178 × 89 × 27 | 26,8 | 177,8 | 88,9 | 7,6 | 12,3 | 33,8 |
CH 203 × 76 × 24 | 23,9 | 203,2 | 76,2 | 7,1 | 11,2 | 30,3 |
CH 203 × 89 × 30 | 29,8 | 203,2 | 88,9 | 8,1 | 12,9 | 37,6 |
CH 229 × 76 × 26 | 26,1 | 228,6 | 76,2 | 7,6 | 11,2 | 33,1 |
CH 229 × 89 × 33 | 32,7 | 228,6 | 88,9 | 8,6 | 13,3 | 41,4 |
CH 254 × 76 × 28 | 28,2 | 254,0 | 76,2 | 8,1 | 10,9 | 35,9 |
CH 254 × 89 × 36 | 35,7 | 254,0 | 88,9 | 9,1 | 13,6 | 45,3 |
CH 305 × 89 × 42 | 41,8 | 304,8 | 88,9 | 10,2 | 13,7 | 53,0 |
CH 305 × 102 × 46 | 46,2 | 304,8 | 101,6 | 10,2 | 14,8 | 58,1 |
CH 381 × 102 × 55 | 55,0 | 381,0 | 101,6 | 10,4 | 16,3 | 69,6 |
CH 432 × 102 × 65 | 65,5 | 431,8 | 101,6 | 12,2 | 16,8 | 82,4 |
The nominal sectional properties of hot-rolled sections made of steel supplied to the requirements of this standard shall be calculated using the formulae given below.
NOTE Radii given by the manufacturer or fixed otherwise, are only for the calculation of the nominal sectional properties and cannot be used for any other purpose
- Parallel flange I- and H- sections
The sectional properties of parallel flange sections are calculated using the formulae given below.
Specified height | h | (cm) | |
Specified flange width | b | (cm) | |
Specified web thickness | tw | (cm) | |
Specified flange thickness | tf | (cm) | |
Cross sectional area | A | (cm) | |
Mass per unit length | M = 0,785 × A | (kg/m) | |
These parameters, which characterize the shape of parallel flange section may vary within the tolerances allowed by EN 10034. The nominal sectional properties can be calculated as follow: | |||
Area |
| (cm2) | |
Second moment of area |
|
| |
Major axis |
| (cm4) | |
Minor axis |
| (cm4) | |
Radius of gyration |
|
| |
Major axis |
| (cm) | |
Minor axis |
| (cm) | |
Elastic section modulus |
|
| |
Major axis |
| (cm3) | |
Minor axis |
| (cm3) | |
- Taper flange I-sections
The sectional properties of taper flange sections are calculated using the formulae given below.
Specified height | h | (cm) | |
Specified flange width | b | (cm) | |
Specified web thickness | tw | (cm) | |
Specified flange thickness | tf | (cm) | |
Cross sectional area | A | (cm) | |
Mass per unit length | M = 0,785 × A | (kg/m) | |
These parameters, which characterize the shape of taper flange section may vary within the tolerances allowed by EN 10034. The nominal sectional properties can be calculated as follow: | |||
Area |
| (cm2) | |
where |
|
| |
|
| ||
|
| ||
Second moment of area
(cm4)
(cm4)
where:
Radius of gyration |
|
| ||
Major axis |
| (cm) | ||
Minor axis |
| (cm) | ||
Elastic section modulus |
|
| ||
Major axis |
| (cm3) | ||
Minor axis |
| (cm3) | ||
- Parallel flange U-sections
The sectional properties of parallel U-sections are calculated using the formulae given below.
Specified height | h | (cm) |
Specified flange width | b | (cm) |
Specified web thickness | tw | (cm) |
Specified flange thickness | tf | (cm) |
Cross sectional area | A | (cm) |
Mass per unit length | M = 0,785 × A | (kg/m) |
These parameters, which characterize the shape of parallel U-sections may vary within the tolerances allowed by EN 10279. The nominal sectional properties can be calculated as follow: | ||
Area |
| (cm2) |
Second moment of area
(cm4)
(cm4)
where
e1 = ez =
e2 = b - e1
Radius of gyration |
|
| ||
Major axis |
| (cm) | ||
Minor axis |
| (cm) | ||
Elastic section modulus |
|
| ||
Major axis |
| (cm3) | ||
Minor axis |
| (cm3) | ||
- Taper flange U-sections
The sectional properties of taper flange U-sections are calculated using the formulae given below. | ||
Specified height | h | (cm) |
Specified flange width | b | (cm) |
Specified web thickness | tw | (cm) |
Specified flange thickness | tf | (cm) |
Cross sectional area | A | (cm) |
Mass per unit length | M = 0,785 × A | (kg/m) |
These parameters, which characterize the shape of taper flange U-sections may vary within the tolerances allowed by EN 10279. The nominal sectional properties can be calculated as follow: | ||
Area |
| (cm2) |
where
Second moment of area for h ≤ 300:
(cm4)
where:
Second moment of area for h > 300:
(cm4)
where:
Second moment of area for h ≤ 300 and h > 300:
(cm4)
where (simplified):
|
e2 = b – e1 |
|
|
|
|
for h ≤ 300; and 
= (b−tw)
for h > 300
for h ≤ 300; and 
for h > 300Radius of gyration | ||
Major axis |
| (cm) |
Minor axis |
| (cm) |
Elastic section modulus | ||
Major axis |
| (cm3) |
Minor axis |
| (cm3) |
(informative)
Comparison of symbols used in EN 10024, EN 10034 and EN 10279 with those in this standard and EN 1993‑1‑1
The comparison of the symbols used in the tolerance standards EN 10024, EN 10034 and EN 10279 and with the relevant symbols used in this standard and in Eurocode 3 standard EN 1993 1‑1 are indicated in Table B.1.
Table B.1 — Comparison with the symbols used in EN 1993‑1‑1
| EN 10024 EN 10034 EN 10279 | EN 10365 EN 1993‑1‑1 |
Depth | h | h |
Flange width | b | b |
Web thickness | s | tw |
Flange thickness | t | tf |
[1] EN 1993-1-1, Eurocode 3: Design of steel structures ‐ Part 1‐1: General rules and rules for buildings
[2] EN 10225-2, Weldable structural steels for fixed offshore structures ‐ Technical delivery conditions – Part 2: Sections
[3] EN 10028-2, Flat products made of steels for pressure purposes ‐ Part 2: Non‐alloy and alloy steels with specified elevated temperature properties
[4] EN 10273, Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
